Lynbrook Glass Header
Home About Us Products Residential Service Department Portfolio Contact Us
  Series SK2 Sloped Wall  
SK2 Sloped Wall System Specifications

Windows to be manufactured by Lynbrook Glass, Hauppauge, NY. Series No. SK2 Slope Wall or equal. Framing members shall be neatly mitered and/or butt joined and sealed. Corners shall be mechanically fastened, and/or hydraulically crimped.

Framing Members

To be 2” sight line x 2” – 10” deep
Wall thickness to be .125 minimum

Thermal Barrier Ventilators

To be of tubular construction mitered and hydraulically crimped – all joints to be sealed – entire frame to be double sealed at interior and exterior with appropriate gaskets to maintain performance requirements.

Performance Rating

Air Infiltration to .004 C.F.M./Ft.² at 6.24 P.S.F.
Water Resistance to 15 P.S.F. No entry.
Uniform Load Deflection: Not to exceed L/175
C.R.F. (Condensation Resistance Factor): 63

^ To the Top ^
Gold Bar - Begin Contact Information
Lynbrook Glass Logo

941 Motor Parkway
Hauppauge, NY 11788
Phone: (631) 582-3060 | Fax: (631) 582-3974

| About Us | Products
Residential | Portfolio | Service Department
Contact Us | Site Map

© 2007 Lynbrook Glass & Architectural Metals Corp. All Rights reserved